English
This article will introduce the removal methods of 3M double-sided adhesive from four aspects. 1. Use a hot air gun to adjust it to the appropriate temperature, blow the hot air towards the surface attached to the 3M double-sided tape, soften it, and then gently peel it off. This method can accelerate the softening and peeling speed of double-sided adhesive without causing damage to the surface of the object being pasted. 2. Use cleaning agents such as alcohol, gasoline, liquid detergents, etc., wet cotton swabs or soft cloth, and wipe the surface of the double-sided adhesive tape until it falls off. This method is suitable for general cleaning situations, but attention should be paid to the amount and quality of cleaning agents used to avoid corrosion or discoloration of the surface of the object being pasted. 3. Use strong peeling tape to wet the strong peeling tape (such as note paper) with water, cover it with 3M double-sided tape, press slightly, and then quickly peel off to remove the double-sided tape. This method can effectively remove smaller 3M double-sided tape, but it is not effective for larger double-sided tape. 4. Use specialized adhesive removers. There are some adhesive removers designed specifically for removing tape in the market. When using, simply apply them to the surface attached to 3M double-sided tape, wait for a moment, and then wipe with a soft cloth. This method is suitable for various occasions and has obvious effects, but it is necessary to pay attention to the amount and time of use in order to achieve the best debonding effect. In summary, there are multiple methods for removing 3M double-sided adhesive, and the best method can be selected according to the actual situation. It should be noted that when removing double-sided tape, it is important to avoid causing damage to the object being applied, and safety measures such as wearing gloves, ventilation, etc. should be taken to ensure personal safety.